Features
A simple kit has been created for the jumper and includes the wire taps and jumper with attached connectors. It will take approximately 15 minutes to install and requires only a pair of needle nose pliers and a screwdriver.

This addition is only for the front outlet and not for the console outlet. Creating a constant powered source for the console outlet requires wires to be cut and not a simple jumper.
Above is a diagram of the rear of the fuse panel and a note describing the location and color of the wire to place a tap on when adding a constant power feature to the front power outlet. It also describes the color of the wire on the rear of the front power outlet where the jumper will be attached
|